Written By Mark Wang On 17th November 2022
LCD advertising display is a medium of advertising communication, it can bring a dynamic rather than static advertising mode to the public, can play public service announcements can also play product introduction, it is the carrier of text communication, but also the medium of video and picture communication. With the use of LCD advertising machine more and more widespread, users today often have some problems in use, will directly affect the stability of the system, the following CY Digital Signage to introduce you to the LCD advertising machine what are the common problems.
1. How to do when the advertising screen does not display?
When the screen of our advertising machine no display, the front panel of the light blinking, this time we need to check the wall-mounted LCD advertising machine display and computer signal line connection, and the signal line socket whether there are pins broken, bent, etc.. After checking all the above actions, we can try to restart the machine, and then check whether the machine can run normally.
2. How to do when the advertising screen flicker phenomenon?
For this situation, we need to pay attention to the analysis of the magnetic field around the LCD advertising machine, power supply voltage and other external factors and exclusionary checks. If and external factors are not relevant, then we should check whether the program is installed on the problem, mainly to check the display graphics card driver. If it still does not work, we can also try to increase the refresh rate of 75HZ. if the above methods are not solved, then you need the assistance of professionals, CY Digital Signage can provide free online remote assistance and guidance.
3. How to do when advertising LCD have black screen?
This phenomenon is generally due to the signal sent by the computer is beyond the display range of the monitor, the monitor detects the abnormal signal to stop working caused. We can try to turn off the power and restart the monitor, reset the computer's output frequency on it.
4. How to do when the LCD advertising display no sound?
First we need to open the back cover of the advertising machine, use a multimeter to check whether the efficacy of the driver board is energized, and then check whether the speaker line connection is normal. The connection is not loose. If the LCD advertising machine speaker noise is very loud, it does not sound like a normal speaker playing out the sound, it means that the advertising machine driver board has been damaged, to be replaced immediately. CY Digital Signage can replace for you free of charge.
5. How to do when plug in the power on the advertising displays does not respond?
This situation is relatively common, you can first disconnect the LCD advertising machine, and then take the machine down, then we open the back cover of the machine, first we need to check the special power energized situation and the wire has not loosened or fallen off.
6. How to do when the LCD screen appears on the thumb size of the black spot?
The general situation is caused by external extrusion. May be in the process of using the LCD advertising machine, accidentally with a finger to its press caused by the inability to screen damage. Although a few presses will not affect the service life of the LCD screen, but we still do not recommend that you use your fingers to press the LCD screen.
7. How to do when the device is switched on and off, the screen appears interference noise?
This is a normal phenomenon, because this is the display card interference with the signal. By automatically or manually adjust the phase can be solved.
Of course, we do not encounter the above problems, usually the LCD advertising machine should also be well cleaned and maintained, so what do we need to pay attention to when cleaning the LCD advertising displays?
When we are cleaning the LCD advertising machine, the shell with a cotton cloth with water wipe on it, do not use any cleaning agent, or the shell will lose its proper luster. When cleaning the LCD screen, use a soft object similar to glasses cloth or lens paper soaked in a little alcohol to wipe, note that the action must be gentle, so as not to scratch the screen, and prohibit the use of wet towels to wipe, because this moisture will enter the screen and thus lead to the machine's internal short circuit.
A Chinese leading Digital Signage Solutions manufacturer since 2010, CY Digital Signage is a high-tech company that integrates manufacturing, R&D and sales, specializing in commercial display solutions. With 12 years of manufacturing experience focusing on commercial displays, CY Digital Signage products have been sold to more than 100 countries, mainly in Southeast Asia, Europe, America, Oceania and Middle East countries.
We have gotten very good feedback from our overseas customers: whether it is network advertising displays, touch displays or all-in-one kiosks. We support OEM, SKD and customization services. There are abundant production lines with over 200 models designed to meet the different needs of our customers. Our solutions are widely used in indoor-outdoor, media groups, advertising, education, medical, transportation, finance, chain stores, hotels, shopping centers and other industries. Our success is driven by our focus on providing the highest quality, market-leading customer service and unparalleled industry expertise. We are a manufacturer dedicated to simplifying emerging technologies in digital signage for our customers.
Mark Wang
Mark Wang is the Chief Technology Officer at CY Digital Signage. And he has over 15 years experiences in digital signage solutions.